HPTouchPad:Configuring webOS

Last Updated: 07/09/2013 By: BillM

Configuring the webOS Environment

This page describes changes to the webOS environment to achieve a prescribed Kids on Computers configuration. Changes to webOS are minimal since the emphasis is on the Android OS. The host system that was used to develop these steps is a PC running Windows 7. Other host system options exist.

The previous step was to update webOS to 3.0.5.

Assumptions

You have:

A PC running Windows 7
- Latest Java installed and running on your Windows 7.
- Files necessary for this step available on the PC.
An HP TouchPad (Tenderloin) that has been inspected, charged and updated according to previous steps.

Set the Kids on Computers logo wallpaper

Connect the TouchPad to the PC with the provided USB cable
- A USB notification window will pop on TouchPad display.
- Select USB Drive mode.
- The TouchPad will be assigned a device drive number by Windows Explorer.
- Windows Explorer will create a window open to the TouchPad's root directory.

On the PC

In the window displaying the TouchPad's root directory, open /wallpapers
Delete the HP-provided wallpaper .jpg files
Copy the 1024x1024 .jpg file with the Kids on Computers logo to this directory
Open /.wallpapers
- delete the files found there and under ./thumbs
- Copy a 1024x1024 .png file with the Kids on Computers logo to this directory
- Copy a 64x64 .png file with the Kids on Computers logo to the ./thumbs directory.

Eject the TouchPad from the PC and remove the USB cable.

NOTE:	Do not remove the cable without first ejecting the TouchPad.

On the TouchPad

In SETTINGS select Screen & Lock
Select Change Wallpaper
The TouchPad should offer only one wallpaper file option: the KoC Logo
Select it and verify.
Go to Turn off After and set it to 10 minutes.
Go back to SETTINGS and select Device Info
The TouchPad's serial number will be displayed. Note it for the TouchPad's GLPI entry.

Back Up the webOS configuration

In SETTINGS select Backup
- Select Back Up Now
- When the backup is finished, reboot
- Verify after rebooting that the wallpaper is correct and the settings are as established above.

The process from first booting webOS to this point takes less than an hour.

The TouchPad is now ready for CyanogenMod 9 installation.