RACHEL PI: Difference between revisions

Latest revision as of 12:29, 7 September 2013

Last Updated: 09/07/2013 By: Randytate

About RACHEL

The RACHEL project, from http://worldpossible.org, provides downloadable content for use offline. Kids on Computers has used some of this content (e.g. offline Khan Academy Video collection) on individual laptops for past projects.

The RACHEL on Raspberry Pi project provides the means to run a server with shared, local content distributed via Wi-Fi or LAN where Internet access is unavailable or limited.

See http://pi.worldpossible.org for more details.

Demo RACHEL server: http://rachel.worldpossible.org

RACHEL Use by KoC

Materials Used (Sep 6, 2013)

KoC Raspberry Pi with RACHEL content, prepared to go to Nepal.

Component	Item Used	Link	Cost
Computer	Raspberry Pi Kit Includes Pi, case, power adapter, and 4GB SD Card	http://www.amazon.com/gp/product/B00B05NBDW/	$84.29 May 4, 2013
Case	(included in bundle)
Power Adapter	(included in bundle)
SD Card	Sony 32GB SDHC Class 10	http://www.amazon.com/gp/product/B00B7ID99I	$18.90 Aug 22, 2013
WiFi	USB 802.11n 150m Wifi Wireless Lan Network Card Adapter	http://www.amazon.com/gp/product/B007BWFXYS/	$5.10 Aug 22, 2013
			Total: $108.29

How It Works

Setup

Follow the instructions on http://pi.worldpossible.org to download the RACHEL Pi package, then load the image onto the SD card.

Insert SD card into the Pi

Initial start up
- Attach HDMI cable to Pi, and a monitor
- Connect ethernet cable to Pi, and to your home router (needs DHCP address)
- Connect USB keyboard to Pi
- Power up the Pi with micro USB connection

Update. This will take several minutes, based on your bandwidth.
- (Default username is "pi" and password is "rachel")
- sudo apt-get update
- sudo apt-get upgrade
- sudo shutdown -h now

Switch to Wi-Fi
- Disconnect ethernet
- Insert USB Wi-Fi adapter
- Disconnect and re-connect micro USB power connection
- Startup takes about 45 seconds
- If you still have HDMI connected, the console should report the Pi's IP address: 192.168.10.1
- If no IP address is shown, look for errors in the console (e.g. unsupported wi-fi adapter)
- The Pi is now acting as a Wi-Fi access point / hotspot and will give out a DHCP address to clients that join the "RPI" network

Connect
- Using a laptop, tablet, ipod, or smartphone with Wi-Fi, look for and join the "RPI" wireless network
- Open a browser to http://192.168.10.1
- Browse HTML content (wikipedia and subset of OLPC), PDFs, and HTML5 video
- If your browser is HTML5 compliant, the video content should work
- There are a few parts of the content that appear to require Flash (?)

Pictures

Raspberry Pi
Raspberry Pi, with wi-fi adapter, running on USB battery power. No wires needed.
HP TouchPad, running CyanogenMod 9, connected wireless to "RPI" hotspot on Raspberry Pi, which is serving content from 32GB SD card
Watching Khan Academy video, served from RPI, in Chrome on HP TouchPad

@@ Line 7: / Line 7: @@
 The RACHEL on Raspberry Pi project provides the means to run a server with shared, local content distributed via Wi-Fi or LAN where Internet access is unavailable or limited.
-See http://pi.worldpossible.org for more details.  A RACHEL server is running on the Internet at http://rachel.worldpossible.org with the exact content available for download to the Pi.
+See http://pi.worldpossible.org for more details.
+Demo RACHEL server:  http://rachel.worldpossible.org
 == RACHEL Use by KoC ==
@@ Line 76: / Line 79: @@
 ** Insert USB Wi-Fi adapter
 ** Disconnect and re-connect micro USB power connection
+** Startup takes about 45 seconds
 ** If you still have HDMI connected, the console should report the Pi's IP address:  192.168.10.1
 ** If no IP address is shown, look for errors in the console (e.g. unsupported wi-fi adapter)
+** The Pi is now acting as a Wi-Fi access point / hotspot and will give out a DHCP address to clients that join the "RPI" network
 * Connect