HPTouchPad:Initial Out-of-Box Activation - Revision history

BillM at 21:36, 28 July 2013

2013-07-28T21:36:49Z

← Older revision		Revision as of 13:36, 28 July 2013
Line 17:		Line 17:

	==== While the battery is charging ====		==== While the battery is charging ====
	* The IMEI number from the box label uniquely identifies the tablet, but is not the actual serial number. The serial number will be identified at a later step. Note the IMEI number and register it in [http://glpi.kidsoncomputers.org GLPI].		* The IMEI number from the box label uniquely identifies the tablet, but is not the actual serial number. The serial number will be identified at a later step, below. Note the IMEI number and register it in [http://glpi.kidsoncomputers.org GLPI].
	* Assign a unique KoC identifying number as the TouchPad's '''NAME''' in Glpi		* Assign a unique KoC identifying number as the TouchPad's '''NAME''' in Glpi
			** Several existing Glpi TouchPad entries are of the form: '''2013-T00NN''' where "'''NN'''" is a numeric sequence. Choose the next number. This two digit number will be used in the TouchPad's unique email address and also in the CyanogenMod environment.
	* Make a label if you have the resources and fix it to the tablet.		* Make a label if you have the resources and fix it to the tablet.
	* By the time the battery is charged, have available the following information:		* By the time the battery is charged, have available the following information:
	** WiFi connection information: SSID and Password		** WiFi connection information: SSID and Password
	** Email registration address ~~from the master system~~		** Email registration address, e.g. ''koc_hptouchpad.00NN@gmail.com''

	==== When the TouchPad boots to webOS for the first time ====		==== When the TouchPad boots to webOS for the first time ====
	* Select the language and confirm.		* Select the language and confirm.
	* Provide network access information: SSID and Password		* Provide network access information: SSID and Password
	* Accept ~~terms~~		* Accept Terms and Conditions
	* Sign In with the ~~master configuration~~ email address and password.		* Under HP webOS Account, Create New Account
	** Name the device:		** Name: Koc Tableta
	*** ''~~KoC HPTouchPad 00??~~''		** Email: ''koc_hptouchpad.00NN@gmail.com'' ; password: ''SoloParaNinos''
			** Recovery Email: ''koc_hptouchpad.0000@gmail.com''
			** [[NOTE: This appears to NOT create the associated gmail account.]]
			* Sign In with the TouchPad's unique email address and password
			* Assign the TouchPad a webOS device name : '''KoC HPTouchPad 00NN'''
			* Accept Terms and Conditions
			* Unset 'Allow Google location service to collect..."
			* Set AutoLocate to '''OFF'''
			* The system will reboot when you press CONTINUE.

	The system ~~will reboot~~. The next step is [[HPTouchPad:Updating webOS\|to update webOS]].		The Launcher page is reached by tapping on the up arrow icon in the bottom right hand corner of the main page.
			Once on the Launcher page, SETTINGS is found at the right of the selection bar at top of page. From Launcher->Settings select Device Info
			* Verify that the Device Name is '''KoC HPTouchPad 00NN''' and correct if necessary
			* Verify that the HP WEBOS ACCOUNT has the correct email address.
			* Record the device SERIAL NUMBER and enter it in Glpi.

			Reboot the system again.

			The next step is [[HPTouchPad:Updating webOS\|to update webOS]].

BillM: /* While the battery is charging */

2013-07-08T21:54:11Z

While the battery is charging

← Older revision		Revision as of 13:54, 8 July 2013
Line 17:		Line 17:

	==== While the battery is charging ====		==== While the battery is charging ====
	* The IMEI number from the box label uniquely identifies the tablet, but is not the actual serial number. Note the IMEI number and register it in [http://glpi.kidsoncomputers.org GLPI].		* The IMEI number from the box label uniquely identifies the tablet, but is not the actual serial number. The serial number will be identified at a later step. Note the IMEI number and register it in [http://glpi.kidsoncomputers.org GLPI].
	* Assign a unique KoC identifying number as the TouchPad's '''NAME''' in Glpi		* Assign a unique KoC identifying number as the TouchPad's '''NAME''' in Glpi
	* Make a label if you have the resources and fix it to the tablet.		* Make a label if you have the resources and fix it to the tablet.

BillM: /* While the battery is charging */

2013-07-08T20:57:51Z

While the battery is charging

← Older revision		Revision as of 12:57, 8 July 2013
Line 17:		Line 17:

	==== While the battery is charging ====		==== While the battery is charging ====
	* ~~Note the serial~~ number from the box label and register it in [http://glpi.kidsoncomputers.org GLPI].		* The IMEI number from the box label uniquely identifies the tablet, but is not the actual serial number. Note the IMEI number and register it in [http://glpi.kidsoncomputers.org GLPI].
	* Assign a unique KoC identifying number as the TouchPad's '''NAME''' in Glpi		* Assign a unique KoC identifying number as the TouchPad's '''NAME''' in Glpi
	* Make a label if you have the resources and fix it to the tablet.		* Make a label if you have the resources and fix it to the tablet.

Randytate at 18:11, 7 July 2013

2013-07-07T18:11:14Z

← Older revision		Revision as of 10:11, 7 July 2013
Line 27:		Line 27:
	* Select the language and confirm.		* Select the language and confirm.
	* Provide network access information: SSID and Password		* Provide network access information: SSID and Password
			* Accept terms
	* Sign In with the master configuration email address and password.		* Sign In with the master configuration email address and password.
	** Name the device:		** Name the device:

Randytate at 01:17, 21 June 2013

2013-06-21T01:17:54Z

← Older revision		Revision as of 17:17, 20 June 2013
Line 9:		Line 9:
	==== Charge the battery ====		==== Charge the battery ====
	Plug in the charger, use the USB cable to connect it to the TouchPad and allow the battery to charge fully. This confirms that all hardware shipped with the TouchPad operates without problems.		Plug in the charger, use the USB cable to connect it to the TouchPad and allow the battery to charge fully. This confirms that all hardware shipped with the TouchPad operates without problems.

			'''Note''': The HP Touchpad requires 2A input power to charge. The charger that is included in the box, when plugged into an outlet, will provide this power. But other A/C adapters may not work. Charging from a computer USB port also may not work.

	* You should allow a minimum of five hours for the battery to charge.		* You should allow a minimum of five hours for the battery to charge.

BillM at 16:59, 20 June 2013

2013-06-20T16:59:22Z

← Older revision		Revision as of 08:59, 20 June 2013
Line 1:		Line 1:
	'''Last Updated:''' {{REVISIONMONTH}}/{{REVISIONDAY2}}/{{REVISIONYEAR}}		'''Last Updated:''' {{REVISIONMONTH}}/{{REVISIONDAY2}}/{{REVISIONYEAR}}
	'''By:''' {{REVISIONUSER}}		'''By:''' {{REVISIONUSER}}

			This is the first in a series of steps describing how to configure an HP TouchPad tablet with an Android OS as prescribed for Kids on Computers use. These steps begin here before the HP TouchPad box is opened and conclude with a usable Android tablet.

	==== Check it out ====		==== Check it out ====
Line 27:		Line 29:
	*** ''KoC HPTouchPad 00??''		*** ''KoC HPTouchPad 00??''

	The system will reboot. The next step is to update webOS.		The system will reboot. The next step is [[HPTouchPad:Updating webOS\|to update webOS]].

BillM: Created page with "'''Last Updated:''' {{REVISIONMONTH}}/{{REVISIONDAY2}}/{{REVISIONYEAR}} '''By:''' {{REVISIONUSER}} ==== Check it out ==== Open the box, remove and unwrap the TouchPad, the charg..."

2013-06-19T21:56:46Z

Created page with "'''Last Updated:''' {{REVISIONMONTH}}/{{REVISIONDAY2}}/{{REVISIONYEAR}} '''By:''' {{REVISIONUSER}} ==== Check it out ==== Open the box, remove and unwrap the TouchPad, the charg..."

New page

'''Last Updated:''' {{REVISIONMONTH}}/{{REVISIONDAY2}}/{{REVISIONYEAR}}
'''By:''' {{REVISIONUSER}}

==== Check it out ====
Open the box, remove and unwrap the TouchPad, the charger and the USB cable and examine the items for physical damage.

==== Charge the battery ====
Plug in the charger, use the USB cable to connect it to the TouchPad and allow the battery to charge fully. This confirms that all hardware shipped with the TouchPad operates without problems.

* You should allow a minimum of five hours for the battery to charge.
* Ignore the tablet and any requests for input while the battery is charging.
* The TouchPad doesn't announce when the battery is fully charged.

==== While the battery is charging ====
* Note the serial number from the box label and register it in [http://glpi.kidsoncomputers.org GLPI].
* Assign a unique KoC identifying number as the TouchPad's '''NAME''' in Glpi
* Make a label if you have the resources and fix it to the tablet.
* By the time the battery is charged, have available the following information:
** WiFi connection information: SSID and Password
** Email registration address from the master system

==== When the TouchPad boots to webOS for the first time ====
* Select the language and confirm.
* Provide network access information: SSID and Password
* Sign In with the master configuration email address and password.
** Name the device:
*** ''KoC HPTouchPad 00??''

The system will reboot. The next step is to update webOS.